home -> Products
 
Temperature test chamber
Time:2011.08.03  Hits:1 次   Source:ALP Technology

 

Purpose

The inner bladder of the chamber is made of SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic.
A large observation window is set on the chamber door.
A test hole with 25mm, or 50mm or 100mm diameter is set on the left of the chamber body.
A fixable PU moving wheel is adopted on the bottom of the test chamber.

Controller

The temperature control instrument adopts imported South Korean TEMI-800 meter with Chinese and English operation interface.

The capacity of 100 sets of programmable 1,000-section 999-circular steps is available, and the set maximal time every section is 99h 59min.

There is RS-232or RS-485 communication interface and can connect to PC for corresponding operation

Cooling and Air Path Circulation System

The cooler adopts original French Tecumseh fully-closed compressor.
The cooling system adopts single or dual low-temperature loop system design.

Specs & Technical Parameters

Model

GDW-100

GDW-225

GDW-500

GDW-800

Workroom Dimensions (cm)

45*45*50

50*60*75

80*70*90

80*100*100

Exterior Dimensions (cm)

105*97*176

105*102*200

132*132*217

147*152*231

Power(@-40)

4.5(KW)

5.5 (KW)

8.0(KW) 

9.0(KW)

Temperature Range

A:-20~150 B:-40~150 C:-60~150 D:-70~150

Fluctuation/Evenness

≤±0.5/≤±2

Temperature Rise Speed

1.0~3.0/min

Temperature Fall Speed

0.7~1.0/min

 
 
Home | About Us | Products | Service | Contact
Copyright 1996 ALP Technology